TS/MP Supplement for Limits Relief (G06.26+)

Recovery. Restart SCF and issue the command again. If repeated attempts to issue the
command fail, gather all relevant EMS logs and SaveAbend files and other information relevant
to the error (see If You Have to Call Your Service Provider) and contact your service provider.
00007 zacs^err^delete^obj
ACS 00007 The ACS object cannot be deleted
Cause. A DELETE ACS command was issued while the ACS subsystem was in the
STARTING, STARTED, or STOPPING state.
Effect. The command fails.
Recovery. Use the STOP command to stop the ACS subsystem completely before issuing the
DELETE command again. Use the STATUS command to check the current state of the ACS
subsystem.
00008 zacs^err^start^obj
ACS 00008 ACS subsystem cannot be started
Cause. A START ACS command was issued while the ACS subsystem was in the STOPPING
state or while ACS core processes ($ZPnn, $ZCSnn, $ZLnn) were still running on some of the
processors.
Effect. The command fails.
Recovery. Use the STATUS command to check the current state of the ACS subsystem before
issuing the START command again. Check all processors to ensure that no processes are
running using the ACS reserved process names.
00009 zacs^err^stop^obj
ACS 00009 ACS subsystem cannot be stopped
Cause. A STOP ACS command was issued while the ACS subsystem was in the ADDED,
STARTING, or STOPPING state.
Effect. The command fails.
Recovery. Use the STATUS command to check the current state of the ACS subsystem before
issuing the STOP command again.
00012 zacs^err^acs^alrdy^started