TS/MP System Management Manual (G06.24+, H06.03+)

Maintaining a PATHMON Environment
NonStop TS/MP System Management Manual—541819-001
5-4
Displaying Configuration Information
The INFO PATHWAY command displays both the maximum values defined and the
values currently in effect.
For example, the display in Example 5-1 shows that a maximum of 50 server classes
can be added to the PATHMON configuration file for this PATHMON environment. A
maximum of 300 server processes can be defined for all server classes. Up to 8
LINKMON processes can communicate with the PATHMON process at the same time.
These numbers indicate that limits for this PATHMON configuration have been
specified to allow for system growth.
The display also shows that a maximum of 50 server classes can have STARTUP
messages; a maximum of 50 server classes can have PARAM messages, and so on.
The security setting “O” prevents alterations of the configuration parameters except by
the owner (\SYS.30,1).
Some of the attributes displayed by the INFO PATHWAY command apply only to
objects configured in the Pathway/iTS environment, as follows:
If Pathway/iTS is not installed at your site, these values should be set to zero. For
instructions on setting values for these attributes, see Section 11, PATHMON
Example 5-1. INFO PATHWAY Display
PATHWAY
MAXASSIGNS 200 [CURRENTLY 63]
MAXDEFINES 0 [CURRENTLY 0]
MAXEXTERNALTCPS 0 [CURRENTLY 0]
MAXLINKMONS 8 [CURRENTLY 1]
MAXPARAMS 50 [CURRENTLY 29]
MAXPATHCOMS 95 [CURRENTLY 3]
MAXPROGRAMS 0 [CURRENTLY 0]
MAXSERVERCLASSES 50 [CURRENTLY 38]
MAXSERVERPROCESSES 300 [CURRENTLY 136]
MAXSPI 10 [CURRENTLY 1]
MAXSTARTUPS 50 [CURRENTLY 0]
MAXTCPS 0 [CURRENTLY 0]
MAXTELLQUEUE 0 [CURRENTLY 0]
MAXTELLS 0 [CURRENTLY 0]
MAXTERMS 0 [CURRENTLY 0]
MAXTMFRESTARTS 0 [CURRENTLY 0]
NODEINDEPENDENT OFF
OWNER \SYS.30,1
SECURITY "O"
MAXEXTERNALTCPS MAXTELLQUEUE
MAXPROGRAMS MAXTELLS
MAXTCPS MAXTMFRESTARTS
MAXTERMS