TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Environment Control Commands
NonStop TS/MP System Management Manual—541819-001
11-13
SET PATHWAY Command
pw-attribute
For information about configuration limits for environments, see Appendix C,
Configuration Limits and Defaults.
MAXASSIGNS number
is the maximum number of ASSIGN definitions that you can specify across all the
server classes in the Pathway environment. Each SET SERVER ASSIGN attribute
counts as one toward the value of this attribute.
number must be a value from 0 to 4095. The maximum number of ASSIGNs
allowed by Pathway across all server classes in a given Pathway environment is
4095.
This attribute is required. It has no default.
MAXPARAMS number
is the maximum number of PARAM messages that you can specify across all
server classes in a given Pathway environment. number must be a value from 0
to 4095.
If you omit this attribute, the default is 0.
This attribute sets the limit on the number of PARAM definitions that you can
specify for Pathway server classes with the SET SERVER command. Because all
SET PATHWAY pw-attribute [ , pw-attribute ]...
pw-attribute is:
MAXASSIGNS number
MAXPARAMS number
MAXSERVERCLASSES number
MAXSERVERPROCESSES number
MAXSTARTUPS number
MAXTCPS number
MAXTERMS number
MAXDEFINES number
MAXEXTERNALTCPS number
MAXLINKMONS number
MAXPATHCOMS number
MAXPROGRAMS number
MAXSPI number
MAXTELLQUEUE number
MAXTELLS number
MAXTMFRESTARTS number
NODEINDEPENDENT [ON | OFF]
OWNER ownerid
SECURITY security-attribute