TS/MP System Management Manual (G06.24+, H06.03+)
PATHMON Environment Control Commands
NonStop TS/MP System Management Manual—541819-001
11-16
SET PATHWAY Command
MAXPROGRAMS number
This attribute is specific to the Pathway/iTS product. A complete description of this
attribute is given in the
Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, it is recommended you specify
0 for the value.
If you omit this attribute, the default is 0.
MAXSPI number
is the maximum number of Subsystem Programmatic Interface (SPI) processes
that can run simultaneously within the Pathway environment. SPI is part of the HP
Distributed Systems Management (DSM) facility. For more information on the SPI
interface, see the
NonStop TS/MP and Pathway Management Programming
Commands Manual
.
number must be a value from 1 through 100. (Until a Pathway environment is
started, only one SPI process or PATHCOM process at a time can open
communication with the PATHMON process.) If you omit this attribute, the default
is 1. For other limits, see Configuration Limits and Defaults on page C-1.
MAXTELLQUEUE number
This attribute is specific to the Pathway/iTS product. A complete description of this
attribute is given in the
Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, it is recommended you specify
0 for the value.
If you omit this attribute, the default is 4.
MAXTELLS number
This attribute is specific to the Pathway/iTS product. A complete description of this
attribute is given in the
Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, it is recommended you specify
0 for the value.
If you omit this attribute, the default is 32.
MAXTMFRESTARTS number
This attribute is specific to the Pathway/iTS product. A complete description of this
attribute is given in the
Pathway/iTS System Management Manual.
If your environment does not support Pathway/iTS, it is recommended you specify
0 for the value.
If you omit this attribute, the default is 5.