TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Environment Control Commands
NonStop TS/MP System Management Manual—541819-001
11-26
STATUS LINKMON Command
If a configuration file already exists, the PATHCOM process notifies the operator.
The operator can either continue the START PATHWAY COLD command or abort
it in preparation for cool starting the environment.
!
specifies that the command is to be executed without any warnings or prompts.
When used with COLD, the PATHMON process writes over the existing
PATHMON configuration file with the current configuration information.
When used with COOL, the PATHMON process uses the existing PATHMON
configuration file to restart Pathway and does not issue a warning if the PATHMON
process name is different from the PATHMON name saved in the PATHMON
configuration file.
Considerations
•
You must define values for the required PATHMON and PATHWAY object
attributes before using the START PATHWAY command with the COLD option.
•
You can issue a START PATHWAY command for a different (remote) Pathway
environment (one controlled by a PATHMON process different from the the
PATHMON process controlling your local Pathway environment).
Examples
This command starts a Pathway environment and causes the PATHMON process to
allocate a new PATHMON configuration file:
START PATHWAY COLD!
This command starts a Pathway environment but causes the PATHMON process to
use the existing PATHMON configuration file:
START PATHWAY COOL
STATUS LINKMON Command
Use the STATUS LINKMON command to display information about LINKMON
processes that have links to server processes.
STATUS [ / OUT list-file / ]
{ [ LINKMON ] L\node.$process-name }
{ LINKMON * }