TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Environment Control Commands
NonStop TS/MP System Management Manual—541819-001
11-27
STATUS LINKMON Command
OUT list-file
directs output to the file that you specify; this could be a DEFINE name. If you omit
this option, the PATHMON process writes the output to the PATHCOM list file; this
is typically the home terminal.
L\node.$process-name
specifies the name of the LINKMON process.
LINKMON *
displays the status of all LINKMON processes currently known to the PATHMON
process.
Display Format
The format of the display returned by the STATUS LINKMON command is shown in
Example 11-1. This format is similar to the one for the STATUS TCP command,
except that the DETAIL option is not available with the STATUS LINKMON command.
The fields are described below.
The fields in this display are as follows:
L identifies the process as a LINKMON process.
\node specifies the name of the NonStop system on which the
LINKMON process is running.
$process-name specifies the name of the LINKMON process. LINKMON
process names are in the form $ZLnn, where nn is the
number of the processor where the LINKMON process
resides.
Example 11-1. STATUS LINKMON Display Format
LINKMON STATE ERROR INFO PROCESS CPU
lm-name state pw-error info process-name cpu
. . . . . .
. . . . . .
. . . . . .
Display Field Description
LINKMON Full name of the LINKMON process, including the node name
STATE Current state of the LINKMON process. The only possible value is:
RUNNING The LINKMON process is running and communicating with
the PATHMON process
ERROR Pathway error number