TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Environment Control Commands
NonStop TS/MP System Management Manual—541819-001
11-28
STATUS PATHMON Command
Examples
This command displays status information for all LINKMON processes communicating
with the PATHMON process:
STATUS LINKMON *
These commands display status information for a specific LINKMON process running
on a specific node:
STATUS LINKMON L\NWREG.$ZL05
STATUS L\NWREG.$ZL05
This command directs status information to a specified output file:
STATUS/OUT STATFLE/LINKMON L\CPTNO.$ZL05
STATUS PATHMON Command
Use the STATUS PATHMON command to display the status of the PATHMON
process, the PATHMON configuration file, and the logging files. This command also
displays a list of the processes currently communicating with the PATHMON process.
OUT list-file
directs output to the file that you specify; this could be a DEFINE name. If you omit
this option, the PATHMON process writes the output to the PATHCOM list file; this
is typically the home terminal.
Display Format
The format of the display returned by the STATUS PATHMON command is shown in
Example 11-2 on page 11-29. The fields are described below.
INFO Additional information regarding the error number. See the error messages
listed in Section 13, PATHMON Messages (Numbers 1000-1999) through
Section 16, LINKMON Log Messages
.
PROCESS Process name of the LINKMON process
CPU processor number in which the LINKMON process is currently running
STATUS [ / OUT list-file / ] PATHMON
Display Field Description