TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Environment Control Commands
NonStop TS/MP System Management Manual—541819-001
11-35
SWITCH PATHMON Command
°
The processor in which the PATHMON primary or backup process is executing
fails.
°
A PATHCOM SWITCH command is executed.
°
A CONTROL PATHMON BACKUPCPU command is executed.
When the PATHMON process does not delay the creation of a backup process, it
resets its internal counter. Consequently, creation of a backup process has to fail
ten more times before the PATHMON process delays creating the backup process.
•
After successfully executing a SWITCH PATHMON command, the PATHMON
process logs this status message:
STATUS - *1077* TAKEOVER BY BACKUP