TS/MP System Management Manual (G06.24+, H06.03+)

SERVER Commands
NonStop TS/MP System Management Manual—541819-001
12-34
SHOW SERVER Command
OUT list-file
directs output to the named list file; this could be a DEFINE name. If this option is
omitted, the PATHMON process directs the output to the PATHCOM list file; this is
typically the home terminal.
Display Formats
When PATHCOM first starts or after a RESET SERVER command is issued, the
SHOW SERVER command displays only the required SET SERVER command
attributes and the server class default values. A question mark appears for required
attribute values that you must set before adding the server class description to the
PATHMON configuration file.
Example 12-1 shows the default displaythe display returned when no SERVER
object attributes have been set. Because the default PROCESSTYPE is GUARDIAN,
this is also the display for Guardian server processes. A question mark (?) indicates a
required attribute.
When the PROCESSTYPE attribute is set to OSS but no other values have been
defined, the same information is displayed.
For any attributes that are set to default to the node where PATHMON is running, the
generic node name \* is displayed for the node name for that attribute. Attributes
would be set to default to the current PATHMON node, for example, if you had SET
NODEINDEPENDENT to ON when you used the SET PATHWAY command to
configure your environment. Attributes would also default to the current PATHMON
node is you set the node default to \* when using the CMDVOL command in your last
PATHCOM session.
Example 12-1. SHOW SERVER Default and Guardian Display
SERVER
PROCESSTYPE GUARDIAN
AUTORESTART 0
CREATEDELAY 1 MINS
DEBUG OFF
DELETEDELAY 10 MINS
HOMETERM $term-name
HIGHPIN OFF
LINKDEPTH 1
MAXSERVERS 1
NUMSTATIC 0
OWNER owner
PRI priority
PROGRAM ?
SECURITY "N"
TMF OFF
VOLUME \node.$volume.subvolume