TS/MP System Management Manual (G06.24+, H06.03+)

SERVER Commands
NonStop TS/MP System Management Manual—541819-001
12-38
STATS SERVER Command
server-class
specifies the name of a previously defined and added server class. Use either a
single name or several names separated by commas and enclosed in
parentheses.
SERVER *
displays statistics for all server classes in the PATHMON configuration file.
COUNT number
specifies the number of times that the STATS command repeats. You can stop the
command from repeating by pressing the Break key.
FREQTABLE
generates a frequency distribution table containing statistics for each server class.
The frequency distribution table is not generatedeven if you specify the
FREQTABLE optionunder these conditions:
•
There have been fewer than 50 response time measurements collected at the time
of the STATS request.
•
At the fiftieth measurement, the size of the time interval calculated is less than 0.01
second.
INTERVAL number
specifies the time period between the statistics displays, incremented in hours,
minutes, or seconds.
RESET
sets the counters used for the measurements back to zero.
Considerations
•
The STATS SERVER command displays statistics for link managers, such as
LINKMON processes. The link managers store the statistics for a server class. If
the server class stops for any reason, its statistics are lost. Consequently, when a
server in that class is restarted, the link manager has no statistics for the server
class.
•
For more information about the STATS SERVER command display, see Tuning
Your System by Using Statistics on page 7-1.
Note. Only TCPs can collect frequency distribution information. You can display this
information for a server only if your environment includes the Pathway/iTS product.