TS/MP System Management Manual (G06.24+, H06.03+)

SERVER Commands
NonStop TS/MP System Management Manual—541819-001
12-42
STATUS SERVER Command
Display Format, PROCESSES Attribute, Without DETAIL
Following is the format of the display returned by the STATUS SERVER PROCESS or
STATUS SERVER PROCESSES commands without the DETAIL option. The fields
not already described are described below.
STATE Current state of the server process. Possible values are:
STOPPED The server process is stopped and has no links to link
managers, such as LINKMON processes.
RUNNING The server process is running.
PENDING The last link was returned but the server process has not yet
stopped. This value might indicate (1) that the PATHMON
process has received a stop message but the link manager
has not been notified the server process is terminated or (2)
that the link manager has notified the PATHMON process that
it is no longer using the server process, and the PATHMON
process is awaiting a stop message.
ERROR PATHMON error number. This number includes any error that might occur
when the PATHMON process attempts to create a dynamic server.
INFO For additional information about the error, see the error messages listed in
Section 13, PATHMON Messages (Numbers 1000-1999)
through Section 16,
LINKMON Log Messages.
#LINKS Number of the links from link managers to the server process.
WEIGHT Indicates the use of the server process compared to the use of other server
processes in the server class.
For each link to a server class, the server process’s weight is incremented by
3 for the first link from a given link manager, such as a LINKMON process,
by 2 for the second link from that link manager, and by 1 for all subsequent
links from that link manager. Note that whenever possible, a link manager
uses older links before newer ones.
STATUS SERVER PROCESS[ES] Display Format
SERVER #RUNNING ERROR INFO
server-name running pw-error info [freeze-state]
. . . .
. . . .
. . . .
LINKER LINK COUNT
name links
. .
. .
. .
Display Field Description