TS/MP System Management Manual (G06.24+, H06.03+)

SERVER Commands
NonStop TS/MP System Management Manual—541819-001
12-43
STATUS SERVER Command
The additional fields returned in this display are as follows:
Display Format, FREEZE Attribute, Without DETAIL
Following is the format of the display returned by the STATUS SERVER FREEZE
command without the DETAIL option. The fields are described below.
The fields in this display are as follows:
Display Field Description
LINKER Name of a link manager, such as a LINKMON process, that is currently
linked to the server.
LINKMON process names have the format: L\node.$process-name
L Identifies the process as a LINKMON process.
\node Name of the NonStop systemNonStop system on which
the LINKMON process is running.
$process-
name
LINKMON process name. LINKMON process names are
in the form $ZLnn, where nn is the number of the
processor where the LINKMON process resides.
LINK COUNT If LINKDEPTH is greater than 1, shows the number of links from the link
manager to this server.
If LINKDEPTH is 1, shows the preference of the link manager for using this
server process over using other server processes in the server class.
Possible values are:
1 Highest preference; first link to be used for this class
2 Next highest preference; second link to be used for this
class
3 Lowest preference; third or subsequent link to be used
for this class
STATUS SERVER FREEZE Display Format
SERVER FREEZE STATE TERM FREEZE
STATE
server-name freeze-state term-name freeze-state
. . . .
. . . .
. . .
Display Field Description
SERVER Name of the server class that has a freeze pending or is frozen