TS/MP System Management Manual (G06.24+, H06.03+)

NonStop TS/MP System Management Manual—541819-001
13-1
13
PATHMON Messages
(Numbers 1000-1999)
This section describes the messages generated by the PATHMON process.
General Information
All messages returned by the PATHMON environment are logged by the PATHMON
process; however, messages in some number ranges represent errors reported to the
PATHMON process by other processes. Message numbers identify the process that
reported the error, as follows:
Messages 1000 through 1999 are described in this section. Messages 2000 through
2999 are discussed in Section 14, PATHCOM Messages (Numbers 2000-2999)
Messages 3000 through 3999 are described in Section 15, Link Manager Messages
(Numbers 3000-3999) Some of these messages apply only to objects managed by the
Pathway/iTS product, such as TCP, TERM, and PROGRAM objects. For information
about those objects, see the Pathway/iTS System Management Manual .
This manual also includes log messages generated by LINKMON processes,
described in Section 16, LINKMON Log Messages.
Additional Error Information
Some messages pertaining to terminal errors include additional information on the
reason for the terminal error. The additional information includes these fields returned
from the STATUS TERM, DETAIL command. The additional information is placed at
the end of the error-message text and starts with three dashes ( --- ):
Message Numbers in This
Range… Are Generated by…
1000 through 1999 PATHMON
process
2000 through 2999 PATHCOM process
3000 through 3999 Link managers (TCPs or LINKMON processes)
Additional Error Information Field Description
INST CODE inst-code The instruction code of the program unit.
AT OFFSET %inst-addr The instruction address of the program unit.
IN PROGRAM UNIT pu-name (pu-vrsn) The name of the program unit followed by
the version of the program unit in
parentheses.
IN TCLPROG pu-file The file where the program unit is located.