TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Messages (Numbers 1000-1999)
NonStop TS/MP System Management Manual—541819-001
13-16
PATHMON Messages
1051
Cause. The internal limit on the total number of concurrent openers of the PATHMON
process would be exceeded by opening this TCP for communication with the
PATHMON process at this time.
Effect. The PATHMON process cannot communicate with the TCP or LINKMON
process.
Recovery. Stop some other TCPs, PATHCOM processes, or SPI communications or
wait until they stop before trying to start this TCP again.
1052
Cause. The TCP specified in a TERM definition or a PROGRAM definition is not
configured. The TCP must be configured and started before its associated TERMs
and PROGRAMs are started.
Effect. The operation fails.
Recovery. Configure the TCP. To determine the name of the unconfigured TCP, use
the INFO PROGRAM command.
1053
Cause. The TCP specified in a TERM definition is not running.
Effect. The operation fails.
Recovery. Determine why the TCP is not running. After correcting the problem, start
the TCP with the START TCP command.
1054
Cause. The TCP or LINKMON process failed during a request.
Effect. The request is not completed.
Recovery. Determine the cause of the TCP or LINKMON process failure by checking
the errors in messages logged just before this message.
*1051* TCP tcp-name, EXCEEDS THE LIMIT ON PATHMON OPENERS.
*1052* TCP NOT DEFINED
*1053* TCP NOT RUNNING
*1054* link manager-name, TCP FAILED DURING REQUEST