TS/MP System Management Manual (G06.24+, H06.03+)

PATHMON Messages (Numbers 1000-1999)
NonStop TS/MP System Management Manual—541819-001
13-17
PATHMON Messages
After correcting the cause of the failure, restart the TCP (this step is not needed if
AUTORESTART is specified for the TCP). A LINKMON process failure requires you to
reload the processor.
If you cannot determine the cause of the error, contact your HP representative and
provide all relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your PATHMON configuration file and the PATHMON process version
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.
1055
Cause. The attempted request exceeds the number of concurrent executions allowed
for the RUN PROGRAM command.
Effect. The PROGRAM terminates.
Recovery. Wait until a RUN PROGRAM request in progress completes and then
initiate an unprocessed RUN PROGRAM request.
1057
Cause. An attempt was made to freeze a server that is already frozen.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1058
Cause. A freeze request for the server is already in progress.
*1055* TOO MANY ENTRIES
*1057* ALREADY FROZEN
*1058* FREEZE IN PROGRESS