TS/MP System Management Manual (G06.24+, H06.03+)

PATHCOM Messages (Numbers 2000-2999)
NonStop TS/MP System Management Manual—541819-001
14-9
PATHCOM Messages
2034
Cause. The named server class is thawed.
Effect. None
Recovery. Informational message only; no corrective action is needed.
2035
Cause. The number of nested command files exceeded the maximum depth of 4.
Effect. The command fails.
Recovery. Rewrite the command files with 4 or less nested files.
2036
Cause. The number of processor pairs exceeded the maximum number of 16.
Effect. The command fails.
Recovery. Specify 16 or less processor pairs.
2037
Cause. The number of defined servers exceeded the maximum value defined for the
MAXSERVERS attribute.
Effect. The command fails.
Recovery. Reduce the number of defined servers or increase the value of the
MAXSERVERS attribute in the SET SERVER command.
2038
Cause. The limit for the configured number of PARAMs has been reached.
Effect. The SET SERVER PARAM command fails.
*2034* SERVER server-name THAWED
*2035* TOO MANY NESTED OBEY FILES (MAX=4)
*2036* TOO MANY CPU PAIRS SPECIFIED (MAX=16)
*2037* NUMBER OF PREDEFINED SERVERS WOULD EXCEED MAXSERVERS
*2038* TOO MANY PARAMS