TS/MP System Management Manual (G06.24+, H06.03+)

PATHCOM Messages (Numbers 2000-2999)
NonStop TS/MP System Management Manual—541819-001
14-10
PATHCOM Messages
Recovery. Reduce the number of PARAM messages.
2040
Cause. PATHCOM is trapped because of a hardware or software failure. These
values reflect the process environment at the time PATHCOM failed:
Effect. PATHCOM fails.
Recovery. Contact your Global Customer Support Center (GCSC).
Before contacting the GCSC, please have this information available:
•
Log files and dump files
•
Your PATHMON configuration file and PATHMON process version
•
A description of the application task that was in progress when the error was
encountered
This information is invaluable for the support staff to be able to understand the problem
and help fix the problem.
2041
Cause. The microcode required for operating NonStop TS/MP has not been installed
in the system.
Effect. NonStop TS/MP cannot run.
Recovery. Load the required NonStop TS/MP microcode and start the PATHMON
objects.
*2040* PATHCOM TRAP T = %trap S = %s-reg P = %p-reg
E = %e-reg L = %l-reg
%trap is the number of the trap.
%s-reg is the stack register.
%p-reg is the program counter
register.
%e-reg is the environment register.
%l-reg is the local register.
*2041* PATHWAY MICROCODE NOT INSTALLED