TS/MP System Management Manual (G06.24+, H06.03+)

Configuration Limits and Defaults
NonStop TS/MP System Management Manual—541819-001
C-6
MAXEXTERNAL-
TCPS
ZMAXEXTERNAL-
TCPS
Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrently
running processes (TCP, external
TCP, LINKMON, PATHCOM, and
SPI) must not exceed 800.
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXLINKMONS ZMAXLINKMONS Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrently
running processes (TCP, external
TCP, LINKMON, PATHCOM, and
SPI) must not exceed 800.
Default: 0
MAXLINKS ZMAXLINKS Values: 0 through 4095
To help determine the appropriate
value for this attribute, see the
discussion on Links earlier in this
appendix.
In a COBOL server, the RECEIVE-
TABLE size must be equal to or
larger than the value of MAXLINKS;
suggested size is larger than
MAXLINKS to allow for future
increases in the configuration.
Default: Unlimited number of links
To help determine the appropriate
value for this attribute, See
Configuring Links for Optimum
MAXPARAMS ZMAXPARAMS Values: 0 through 4095
The value of MAXPARAMS should
not exceed value of
MAXSERVERPROCESSES.
Default: N.A.
Table C-2. Limits and Defaults for Parameters (page 4 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.