TS/MP System Management Manual (G06.24+, H06.03+)

Configuration Limits and Defaults
NonStop TS/MP System Management Manual—541819-001
C-8
MAXSPI ZMAXSPI Values: 1 through 100
Maximum number of concurrent
openers of the PATHMON process
(TCP, external TCP, LINKMON,
PATHCOM, and SPI) must not
exceed 800.
For production, the value for this
parameter should be large enough
to allow for parallel interfaces
(multiple PATHCOM and SPI
processes).
Default: 1
MAXSTARTUPS ZMAXSTARTUPS Values: 0 through 4095
Value must not exceed value of
MAXSERVERCLASSES.
Default: N.A.
MAXTCPS ZMAXTCPS Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrent
openers of the PATHMON process
(TCP, external TCP, LINKMON,
PATHCOM, and SPI) must not
exceed 800.
Recommended value if Pathway/iTS is not
installed at your site: 0.
MAXTELLQUEUE ZMAXTELLQUEUE Values: 0 through 300
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXTELLS ZMAXTELLS Values: 0 through 4095
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXTERMS ZMAXTERMS Values: 0 through 4095
Recommended value if Pathway/iTS is not
installed at your site: 0
Table C-2. Limits and Defaults for Parameters (page 6 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.