TS/MP System Management Manual (G06.24+, H06.03+)

Configuration Limits and Defaults
NonStop TS/MP System Management Manual—541819-001
C-9
MAXTMFRE-
STARTS
ZMAXTMFRE-
STARTS
Values: -1 Unlimited restarts
0 No restarts
1 through 32,767 Number of restarts
Default: 5
MODE ZMODE Values: ORDERLY | ABORTTERM |
IMMEDIATE
Default: ORDERLY
N.A. ZACCESS Values: I/O | INPUT | OUTPUT
Default: No value is passed.
N.A. ZEXCLUSION Values: EXCLUSIVE | SHARED|
PROTECTED
Default: No value is passed.
N.A. ZFILECODE Values: 0 through 65,535
Default: 0
N.A. ZRECORDSIZE Values: 1 through 4072
Default: No value is passed.
N.A. ZBLOCKSIZE Values: 1 through 4096
Default: No value is passed.
NODEINDEPEN
DENT
ZNODEINDEPEN
DENT
Values: ON | OFF
Default: OFF
N.A. ZNODEINDEPEN
DENTFORMAT
Values: YES | NO
Default: NO
NUMSTATIC ZNUMSTATIC Values: 0 through 4095; must not exceed
value of MAXSERVERS.
The number of dynamic servers for a
server class is MAXSERVERS
minus NUMSTATIC.
For better performance, the value
should be close to or equal to
MAXSERVERS.
Default: 0 (all servers are dynamic)
Table C-2. Limits and Defaults for Parameters (page 7 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.