TS/MP System Management Manual (G06.24+, H06.03+)

Starting and Stopping a PATHMON Environment
NonStop TS/MP System Management Manual—541819-001
2-18
Monitoring Shutdown Status
•
Specify the STATUS PATHWAY command from any PATHCOM process. (For
details on using the PATHCOM that issued the SHUTDOWN2 command, see
Using PATHCOM During Shutdown on page 2-21.) As an example, this command
displays status every 30 seconds, up to 5 times:
= STATUS PATHWAY, COUNT 5, INTERVAL 30 SECS
As shown in Example 2-1, both STATUS commands indicate:
•
The Pathway environment is shutting down, or shutdown has failed
•
The time shutdown began
•
Status of all entities defined in the Pathway environment
If Shutdown Cannot Complete
If the PATHMON process encounters an error while shutting down, it terminates the
shutdown operation. PATHCOM returns the reason for the failure. In some cases, you
may need to examine the log file to determine why shutdown did not complete, fix the
problem, and reissue the SHUTDOWN2 command.
Example 2-1. SHUTDOWN2 Status Display
PATHWAY -- STATE = SHUTTING DOWN (IN PROGRESS) - STARTED 2:11:39
RUNNING
LINKMONS 0
PATHCOMS 1
SPI 0
FREEZE
RUNNING STOPPED THAWED FROZEN PENDING
SERVERCLASSES 2 1 1 0 0
RUNNING STOPPED PENDING
SERVERPROCESSES 8 1 0
TCPS* 2 4 0
RUNNING STOPPED PENDING SUSPENDED
TERMS* 8 8 0 0
PATHWAY - STATE = SHUTTING DOWN (IN PROGRESS) - STARTED 2:11:39
RUNNING
LINKMONS 0
PATHCOMS 1
SPI 0
FREEZE
RUNNING STOPPED THAWED FROZEN PENDING
SERVERCLASSES 0 3 1 0 0
RUNNING STOPPED PENDING
SERVERPROCESSES 1 8 0
TCPS* 0 6 0
RUNNING STOPPED PENDING SUSPENDED
TERMS* 0 16 0 0
=
* Defined only if you have the Pathway/iTS product