Tuxedo 6.5.3 Administrator README

3. Enter OSS by typing OSH at the TACL prompt.
4. Position (cd command) to the directory where the Install.sh file
was copied to during step 2.
5. Turn on execute permission to Install.sh (for example, type the
command: chmod +x Install.sh).
6. Execute the Install.sh script and follow the directions. Select
the webgui package to be installed. If you are installing only the
Administrator CD, reinstall the tuxdoc package to get the
Administrator's Readme file. (Documentation for Administrator is
installed with the tuxdoc package except for the Readme.) Answer
Install.sh script questions as follows:
a. For the location of the files (which are the NonStop(TM)
TUXEDO PAX files that IPSetup placed in the ZOSSUTL ISV),
type an OSS pathname. For example, use /G/system/zossutl.
b. For the location of Administrator subdirectories, Compaq
recommends that you accept the default values.
IV. Product Requirements
Required Hardware:
NonStop(TM) RISC-based Systems
Minimum OS Release:
NonStop(TM) Kernel release D45 or G05.01
Requisite IPMs:
None
Required Software:
Compaq NonStop(TM) TUXEDO for Himalaya (R6.5) V3
Disk Space Requirement:
WebGUI (T0226) 3.1 MB
Documentation 2.6 MB
V. Installation Prerequisites
Required Hardware:
Compaq NonStop(TM) Himalaya server
Communications controller allowing file transfer
from PC to Compaq NonStop(TM) Himalaya server
PC with 486 or higher processor and all of the following:
CD-ROM drive
VGA or higher-resolution video adapter and monitor
Microsoft Mouse or similar pointing device
Communications controller allowing file transfer
from PC to Compaq NonStop(TM) Himalaya server
Required Software:
T9550D30 SOCKET LIBRARY or higher version
T9552D30 TCP/IP FTP with IPM ABG or superseding IPM
(for releases D31.00 to D40.00)
T9552D40 TCP/IP FTP with IPM ABJ or superseding IPM
file:///C|/Release 6.5 V3/ReadmeNSTux65v3Admin.txt
file:///C|/Release 6.5 V3/ReadmeNSTux65v3Admin.txt (3 of 8) [4/27/2004 10:39:07 AM]