Tuxedo 6.5.3 LLE README

ManualsBrandsHP ManualsServerHP NonStop G-Series

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: Compaq LLE for NonStop(TM) TUXEDO (R6.5)

Export Control Classification Number (ECCN): 5D002 T4

Product ID:

SN43V2

Component Products:

Component NonStop(TM) TUXEDO T-number(s) (R6.5 V3 version):

T0220 - Compaq LLE for NonStop(TM) TUXEDO <== (V03)

T0493 - NSTUX WSC 128BIT for Compaq NonStop(TM) TUXEDO (R6.5) <==(D46)

T0174 - Compaq Jolt 128BIT (R1.2) domestic version <== (V02)

NOTE: For possible replacement installation steps or other product

documentation changes, see the following World Wide Web site:

http://himalaya.compaq.com/nsswdocs/tuxedo/home.htm

DATE: This ReadMe file was last updated 18 September 2000.

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need version 3.0 or

later of Adobe Acrobat Reader or Exchange to read or print the

IPSetup User Guide and NonStop(TM) TUXEDO Documentation. Obtain

the Reader by downloading it from the following URL:

http://www.adobe.com/prodindex/acrobat/readstep.html

4. Use either of the following methods to move/copy files to the

Installation Subvolumes: (A) IPSetup only, or (B) IPSetup in

conjunction with DSM/SCM.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. If you use DSM/SCM to move the files to the Installation

Subvolumes, ensure that you check the "Use DSM/SCM" box and run

all phases of DSM/SCM before you run the Install.sh script.

If you normally use INSTALL to install new software, run IPSetup

and uncheck the "Use DSM/SCM" box, to allow IPSetup to move the

NonStop(TM) Kernel files to the correct ISVs.

If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the

IPSetup User Guide section "Manual Software Placement Using

the IPSetup TACL Program" to manually place NonStop(TM) Kernel

file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt

file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt (1 of 5) [4/27/2004 10:39:54 AM]

Summary of content (5 pages)

PAGE 1
file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2000 Compaq Computer Corporation Product Name: Compaq LLE for NonStop(TM) TUXEDO (R6.5) Export Control Classification Number (ECCN): 5D002 T4 Product ID: SN43V2 Component Products: Component NonStop(TM) TUXEDO T-number(s) (R6.5 V3 version): T0220 - Compaq LLE for NonStop(TM) TUXEDO <== (V03) T0493 - NSTUX WSC 128BIT for Compaq NonStop(TM) TUXEDO (R6.5) T0174 - Compaq Jolt 128BIT (R1.
PAGE 2
file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt files. Note: Compaq recommends that you move/copy the files by using either DSM/SCM or IPSetup for each distribution CD in the NonStop(TM) TUXEDO product set (NonStop(TM) TUXEDO core services, the Administrator, Jolt components, and LLE components) to place all the files on the NonStop(TM) Kernel system. Then run Install.sh to install all the components at once, rather than installing them sequentially.
PAGE 3
file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt 2. Use the ftp command to transfer the Install.sh shell script file (in ASCII format) from the CD to an OSS directory. 3. Enter OSS by typing OSH at the TACL prompt. 4. Position (cd command) to the directory where the Install.sh file was copied to during step 2. 5. Turn on execute permission to Install.sh (for example, type the command: chmod +x Install.sh). 6. Execute the Install.sh script and follow the directions. Select packages as follows: a.
PAGE 4
file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt Requisite IPMs: None Required Software: Compaq NonStop(TM) TUXEDO for Himalaya (R6.5) Disk Space Requirement: T0220PAX 3 MB T0493PAX 16 MB T0174PAX 1 MB LTUXT6U 2 MB LTUXW6U 1 MB T0220 5 MB (includes LTUXT6U and LTUXW6U) V.
PAGE 5
file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.txt LICENSE.TXT File containing limited-use Software Licensing Agreement with the licensing terms governing this product. README.TXT File containing product and installation information (this file). SETUP.EXE File containing the Launcher executable. NSK_SW Subdirectory containing NonStop(TM) Kernel component files, including installation utilities and instructions. VIII. Known Problem List None. file:///C|/Release 6.5 V3/ReadmeNSTux65v3LLE.