Tuxedo 6.5.3 /WS OSS Client README

ManualsBrandsHP ManualsServerHP NonStop G-Series

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: Compaq /WS OSS Client for NonStop(TM) TUXEDO (R6.5)

Export Control Classification Number (ECCN): 5D002

Product ID:

SN49V1

Component Products:

/WS System Clients (R6.5 V3 Update 2 version):

T8350 - NonStop TUXEDO /WS System Client NSK OSS, IPM T8350AAQ

Component NonStop TUXEDO T-number(s) (R6.5 V3 version):

T0412 - NonStop TUXEDO HTML Documentation

NOTE: For possible replacement installation steps or other product

documentation changes, see the following World Wide Web site:

http://nonstop.compaq.com/nsswdocs/tuxedo/home.htm

DATE: This ReadMe file was last updated 27 August 2001,

for NonStop TUXEDO R6.5 V3 Update 2.

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need version 3.0 or

later of Adobe Acrobat Reader or Exchange to read or print the

IPSetup User Guide and NonStop TUXEDO Documentation. Obtain the

Reader by downloading it from the following URL:

http://www.adobe.com/prodindex/acrobat/readstep.html

4. Use either of the following methods to move/copy files to the

Installation Subvolumes: (A) IPSetup only, or (B) IPSetup in

conjunction with DSM/SCM.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. If you use DSM/SCM to move the files to the Installation

Subvolumes, ensure that you check the "Use DSM/SCM" box and run

all phases of DSM/SCM before you run the Install.sh script.

If you normally use INSTALL to install new software, run IPSetup

and uncheck the "Use DSM/SCM" box, to allow ISPSetup to move the

NonStop Kernel files to the correct ISVs.

If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the

IPSetup User Guide section "Manual Software Placement Using

file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt

file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt (1 of 8) [6/28/2004 4:06:43 PM]

Summary of content (8 pages)

PAGE 1
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2001 Compaq Computer Corporation Product Name: Compaq /WS OSS Client for NonStop(TM) TUXEDO (R6.5) Export Control Classification Number (ECCN): 5D002 Product ID: SN49V1 Component Products: /WS System Clients (R6.5 V3 Update 2 version): T8350 - NonStop TUXEDO /WS System Client NSK OSS, IPM T8350AAQ Component NonStop TUXEDO T-number(s) (R6.
PAGE 2
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt the IPSetup TACL Program" to manually place NonStop Kernel files. 7. Follow the post-installation instructions in Section III below, if any, after using IPSetup to place and install this product. II. Pre-Installation Instructions Prepare to run IPSetup by performing the following steps: 1.
PAGE 3
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt CODE EOF LAST MODIFIED OWNER RWEP LTUXW65 700 923704 30nov1999 10:24 255,255 NUNU TACL> vproc $system.system.ltuxw65 . . . . $SYSTEM.SYSTEM.
PAGE 4
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt Discussion: IPSetup assumes ftp is using the Guardian API. If the user ID specified to IPSetup has an initial OSS directory (that is, the SAFEGUARD attribute initial-directory is set) then ftp uses the OSS API and IPSetup fails with error 550 indicating it was unable to do a "chdir" to the subvolume specified. To work around this problem, alter the user ID by removing the initial-directory set and rerun IPSetup.
PAGE 5
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt cd ar ar -x ../$FILEA for FILEO in `ls *.o`; do nld -x -r $FILEO -o $FILEO done rm -f ../$FILEA ar -rv ../$FILEA *.o cd .. rm -rf ar chmod -w $FILEA done } For T8350, the above script changes the size of the files in $TUXDIR/lib from 17MB to 4.7MB. The /WS SRL can be stripped this way: strip -Ws /G/system/system/ltuxw65 IV.
PAGE 6
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt T9553 T9627 T9673 TELNET (CLIENT & SERVER) OSSFSLIB INSPECT (Note: superceded by Requisite IPM T9673ABB) Disk Space Requirement: /WS OSS client Documentation 29 MB 30 MB Note: The disk space requirements for this Update have increased significantly from R6.5 V3 due to the change for solution 10-001027-7158.
PAGE 7
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt Agreement with the licensing terms governing this product. README.TXT File containing product and installation information (this file). SETUP.EXE File containing the Launcher executable. NSK_SW Subdirectory containing NonStop Kernel component files, including installation utilities and instructions. CD_DOCS Subdirectory containing product documentation in the following files and subdirectories: home.
PAGE 8
file:///C|/READMEs TUXEDO/Release 6.5 V3 Readme 2/NSTux653u3ReadmeWSOSSClient.txt IX. Problems Fixed in This Update This Update has the /WS OSS client for NonStop TUXEDO contained in SR62V3 Update 2 (the core TUXEDO product) See the README files for these updates to find the problems fixed in this Update. None of the fixed problems related to the /WS OSS client functions of NonStop TUXEDO. X. Known Problems List 1.