Tuxedo 8.0 /WS OSS Client README

+ ALTER USER <userid>, INITIAL-DIRECTORY
+ EXIT
Alternatively, you can start SAFEGUARD from an OSS shell, for
example: gtacl -p safecom
5. To use the 128-bit LLE version of the /WS OSS client, the 56-bit
LLE version of the /WS OSS Client (this software, SR73V1) should be
installed first. Then the 128-bit LLE (SR74V1) software can be
installed.
III. Post-Installation Instructions
1. Ensure all intended users have read and execute permission to file
LTUXW80 in $SYSTEM.SYSTEM.
2. Use the ftp command to transfer the Install.sh shell script file
(in ASCII format) from the CD to an OSS directory.
3. Enter OSS by typing OSH at the TACL prompt.
4. Position (cd command) to the directory where the Install.sh file
was copied during step 2.
5. Turn on execute permission to Install.sh, for example, type the
command: chmod +x Install.sh
6. Execute the Install.sh script and follow the directions. Answer
Install.sh script questions as follows:
a. For the location of the files (which are the NonStop Tuxedo PAX
files that IPSetup placed in the ZOSSUTL ISV), type an OSS
pathname. For example: /G/system/zossutl
b. For the location for TUXDIR and other directories, HP
recommends that you accept the defaults, which use
/tuxedo8.0 for TUXDIR and then cause the other subdirectories
to be located under the /tuxedo8.0 directory.
IV. Product Requirements
Required Hardware:
NonStop RISC-based Systems
Minimum OS Release:
NonStop Kernel release G06.11
Requisite PVUs:
Requisite Java PVU:
T0083AAM V21 Unrestricted (Java)
Requisite SQL/MX EXE PVU for G06.13 to G06.17:
T1051AAF G07 Unrestricted (SQL/MX EXE)
Requisite NMCOBOL PVU:
T8107ABF D46 Unrestricted (NMCOBOL)
Requisite Native Mode NMGEN for G06.11 to G06.16:
file:///C|/Release 8.0/ReadmeNSTux80WSOSSClient.txt
file:///C|/Release 8.0/ReadmeNSTux80WSOSSClient.txt (4 of 8) [4/27/2004 10:44:53 AM]