ViewPoint Manual

Definition of ViewPoint Screens
ViewPoint Manual—426801-001
3-31
Profile Screen
Profile Screen
Figure 3-9 shows the Profile screen.
F9 Prints the entire screen—data and all headings and legends.
F10 Copies selected status items to the end of the clipboard file. Enter nonblank
characters in column 1 preceding the items you want to copy, and press F10.
You can print these selected status items by pressing F9.
F12 Has two different uses:
•
Displays the Status Item Configuration screen, if you select one or more
status items for configuration (with a nonblank character in column 1).
•
Displays the Status Configuration screen, if you do not select any items. Use
the Status Configuration screen when you want to change the screen update
interval. If you select items, ViewPoint displays the Status Item
Configuration screen for the first selected item. Then, make your changes
and press F12 on that screen to advance from one item to the next. After you
have configured the last selected item, press F12 to return to the Network
Status Summary screen.
Figure 3-9. Profile Screen Format
Table 3-7. Function Key Notes (Network Status Summary Screen) (page 2 of 2)
Function
Key Special Requirements
CDT039.cdd