Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Using VHSCI
Virtual Hometerm Subsystem (VHS) Manual—429311-002
5-12
Using Online Help
To get a list of VHSCI commands and to get help on using HELP, enter ALL at the
HELP prompt:
HELP : all
VHSCI is a conversational interface for the VHS subsystem.
-------------------------- COMMANDS------------------------------------
The following are VHSCI commands:
ALIAS ALLOW ALTER ASSIGN
ASSUME CLEAR COMMENT CONFIRM
CPUS DELAY DETAIL ENV
EXIT FC HELP HISTORY
INFO LISTOPENS LOG OBEY
OUT PAGESIZE PARAM PAUSE
REPEAT RUN SETPROMPT STATS
STATUS SYSTEM TIMEOUT VERSION
VOLUME ! ?
--------------------- HOW TO USE HELP ---------------------------------
The HELP command displays a detailed description of
commands, object types, and basic components. There are two modes
of help operation--line mode and menu mode. Help text is accessed
in line mode (when the prompt is "->") by entering the full help
command (e.g. "HELP STATUS"). Help text is accessed in
menu mode (when the prompt is "HELP :") by entering each part of the
command in answer to the prompting text. VHSCI is in line mode by
default. To enter menu mode type "HELP" followed by the return key.
Menu mode help can only be used in interactive mode. If HELP<CR>
is entered during a non-interactive VHSCI session, HELP ALL (this text)
will be displayed.
To obtain a description of the help command while in line mode
type "HELP HELP <return>" or while in menu mode type "VHSCI <return>
HELP <return>".
The help key (F16) is used to show all the valid options at any
point in a command. For a complete description of the help key
while in line mode type "HELP HELP-KEY <return>" or while in menu
mode type "HELP-KEY <return>".