Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Using VHSCI
Virtual Hometerm Subsystem (VHS) Manual—429311-002
5-18
Modifying a VHS Parameter
Example
Considerations
•
You can modify all the parameters appearing in the list above.
•
You do not need to enter all the letters of the parameter name when you want to
modify it. Only the first characters that differentiate the parameter from the other
one is accepted. For example, to modify the GENERATE-DISPLAY-EVENT, you
can enter this command:
-> alter process $vhsd, GENERATE-D OFF
Since GENERATE-D differentiates the GENERATE-DISPLAY-EVENT parameter
from the other, it will be understood by the VHSCI as the GENERATE-DISPLAY-
EVENT parameter.
Modifying a VHS Parameter
You can modify a parameter with the ALTER command. When you modify a parameter,
the new value of this parameter is immediately used by the VHS process.
VHS Info Process $VHSD, detail
VHS Detailed Info PROCESS $VHSD running under Environment PROD
Max opens..................... 512
Primary log................... \POLLUX.$VHS.VHSD21.LOG0003
Max primary log files......... 5
Prompt file................... \POLLUX.$VHS.VHSD21.PROMPT
EMS collector................. \POLLUX.$0
Inspect file.................. \POLLUX.$VHS.VHSD21.VHSINSP
Next save file................ \POLLUX.$VHS.VHSD21.SAVE0000
Accept-ext-ascii-character.... OFF
Add-text-to-event............. ON
Automatic-inspect-processing.. ON
Backup-creation-message-delay. 5
Environment-name.............. PROD
File-code..................... 0
Generate-display-event........ ON
Generate-inspect-event........ ON
Generate-prompt-event......... ON
Maxextents.................... 16
Open-table-threshold.......... 90
Primary-security.............. NNNN
Prompt-event-resend-delay..... 15
Purge-savefile................ OFF
Remove-extra-spaces........... ON
Saveabend-file................ ON
Suppress-display.............. OFF
Vhs-GUI-mode.................. ON
Vhs-logger.................... ON
Logs:
*LogName *LogType
\POLLUX.$VHS.VHSD21.LOG0003 (P) ALL