Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-002
7-10
ALTER Command
ON | TRUE
adds the text token to EMS event messages.
OFF | FALSE
does not add the text token to EMS event messages.
AUTOMATIC-INSPECT-PROCESSING on-off-value
specifies if VHS must process Inspect/eInspect prompts or let the user manage
them via the VHS Prompt Browser screen. The default value is ON:
on-off-value: [ ON | TRUE | OFF | FALSE ]
ON | TRUE
indicates that VHS automatically processes Inspect/eInspect prompts.
OFF | FALSE
OFF:indicates that VHS is does not process Inspect/eInspect prompts. They
are to be managed via the VHS Prompt Browser screen.
BACKUP-CREATION-MESSAGE-DELAY time-value
specifies the delay in minutes between each occurrence of the backup creation
failure message. time-value must be between 0 and 999. The default value is
5 minutes.
ENVIRONMENT-NAME string-value
specifies the name of the VHS process environment. string-value specifies
the environment name length. The value must be between quotes and its first
character must be alphabetic. All other characters can be alphabetic, numeric, or a
“-”. The environment name length can be from 1 to 8 characters long.
EXTENT numeric-values
specifies primary and secondary extents to be used for the creation of the primary
log file. The primary and secondary extent values must be between 2 and 65535,
between parenthesis, and comma-separated. The default value is (100,100).
FILE-CODE numeric-value
specifies the file code to be used for the creation of the primary log file. Must be
between 0 and 65535. The default value is 0.
GENERATE-DISPLAY-EVENT on-off-value
specifies if an EMS event message is to be generated for a display type message.
The default value is ON.
on-off-value: [ ON | TRUE | OFF | FALSE ]