Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-002
7-11
ALTER Command
ON | TRUE
indicates that VHS will generate an EMS event message for a display type
message.
OFF | FALSE
indicates that VHS will not generate an EMS event message for a display type
message.
This attribute can only be modified when the VHS-GUI-MODE is set to OFF.
GENERATE-INSPECT-EVENT on-off-value
specifies if an EMS event message is to be generated for an inspect type
message. The default value is ON.
on-off-value: [ ON | TRUE | OFF | FALSE ]
ON | TRUE
indicates that VHS will generate an EMS event message for an inspect type
message.
OFF | FALSE
indicates that VHS will not generate an EMS event message for an inspect
type message.
This attribute can only be modified when the VHS-GUI-MODE is set to OFF.
GENERATE-PROMPT-EVENT on-off-value
specifies if an EMS event message is to be generated for a prompt type message.
The default value is ON.
on-off-value: [ ON | TRUE | OFF | FALSE ]
ON | TRUE
indicates that VHS will generate an EMS event message for a prompt type
message.
OFF | FALSE
indicates that VHS will not generate an EMS event message for a prompt type
message.
This attribute can only be modified when the VHS-GUI-MODE is set to OFF.
MAXEXTENTS numeric-value
specifies the maximum number of extents to be used for the creation of the primary
log file. The value must be between 16 and 978.