Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-002
7-12
ALTER Command
OPEN-TABLE-THRESHOLD numeric-value
indicates the percentage of full value of the opener table at which VHS will
generate an EMS event message. The value must be between 0 and 100. The
default value is 90.
PRIMARY-SECURITY string-value
specifies the security string to be used for the creation of the primary log file. The
value must be between quotes. The default value is “NUUU”.
PROMPT-EVENT-RESEND-DELAY numeric-value
indicates the time delay in minutes used by VHS before resending EMS events for
unanswered prompts.
This attribute can only be modified when the VHS-GUI-MODE is set to ON.
PURGE-SAVEFILE on-off-value
specifies that VHS is to add the “force it” (!) option when sending a SAVE
command to Inspect/eInspect. The default value is OFF.
on-off-value: [ ON | TRUE | OFF | FALSE ]
ON | TRUE
indicates that VHS will add the “force it” (!) option when sending a SAVE
command to Inspect/eInspect. If the save file already exists, it will be purged
before creating the new one.
OFF | FALSE
indicates that VHS will not add the “force it” (!) option when sending a SAVE
command to Inspect/eInspect.
REMOVE-EXTRA-SPACES on-off-value
specifies if an occurrence of multiple spaces is to be replaced by only one space in
the display type message. The default value is ON.
on-off-value: [ ON | TRUE | OFF | FALSE ]
ON | TRUE
indicates that VHS will replace an occurrence of multiple spaces by only one
space in the display type message.
OFF | FALSE
indicates that VHS will log the display type message as received.