Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-002
7-28
INFO Command
Considerations
•
The VHSCI history buffer is 1024 bytes in memory. The exact number of
retrievable command lines depends on the length of the commands.
•
The command lines are saved in the history buffer exactly as they were entered,
with the exception of the FC and ! commands. The command lines generated by
these commands display instead of the commands themselves.
•
The HISTORY command cannot be issued by a noninteractive user.
Examples
displays the last 10 commands.
displays the last 22 commands.
INFO Command
The INFO command displays the current attribute values for the specified object or
objects.
file-spec
directs any VHSCI output generated for this command to the specified file.
object-spec
designates the object or objects whose attribute values are to be displayed. If
object-spec is omitted, attribute values for the assumed object display. For
more information, see ASSUME Command on page 7-17.
DETAIL
causes detailed information to be displayed. If omitted, only one line of information
is displayed for each object.
Consideration
Use the STATUS command to display dynamic information about objects.
-> HISTORY
-> HISTORY 22
INFO [ / OUT file-spec / ] [ object-spec ] [ , DETAIL ]