Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

The VHS GUI
Virtual Hometerm Subsystem (VHS) Manual—429311-002
8-4
VHS GUI Installation
EMS Forward
This is the EMS forwarding distributor that forwards the VHS EMS events to the central
node (For more information, see the filter example at the end of this section).
VHS GUI Installation
VHS GUI installation consists of these steps:
STEP 1: Install VHS on the HP System
To install VHS, see Section 2, Installing VHS.
STEP 2: Install the See View Server Gateway on Your Central
HP System
To install the SeeView Server Gateway on your central host computer, see the
SeeView Server Gateway(SSG) Manual. The manual provides an in-depth description
of how to install the SSG on NonStop servers. In brief, the steps are:
> LOGON network-group.userid
> VOLUME $SSG-ISV-Volume.ZNOWSSG
> SEEVIEW /in SSGSETUP/
Follow the directions contained in the SSG Online Help for 'Local Node Install'.
When the SSG Installation is completed, start SSG by using the SSGCOM command
interpreter START command. For example:
> SSGCOM
+ START
STEP 3: Install the VHS GUI on Your Workstation Running
Windows NT.
A self-extracting VHS GUI is included in the VHS GUI Host Installation Subvolume
(ISV) with the file name VHSGUI.
To install the VHS GUI from the HP Host:
1. Download VHSGUI from your HP Host system, and place it in a directory such as
C:\VHSISV.
2. Rename VHSGUI to VHSGUI.EXE.
Note. If DSM is now installed on your VHS Central Node, SSG will have been installed as well
and does not need to be reinstalled.