Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-002
D-39
100: ZVHS-EVT-VHS-STARTED
Unconditional Tokens
ZSPI-TKN-SSID
is the subsystem ID for VHS and is described in the SPI Programming Manual.
The value of this token is always ZVHS-VAL-SSID.
ZEMS-TKN-EVENTNUMBER
is the event message number. The value for this event message is ZVHS-EVT-
VHS-STARTED (100).
ZEMS-TKN-SUBJECT-MARK
is the standard EMS token that immediately precedes the subject token ZVHS-
TKN-PNAME.
ZEMS-TKN-EMPHASIS
is set to ZSPI-VAL-FALSE because this event message is informative.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID
and TEXT
are described under EMS Standard Definitions on page D-5.
ZEMS-TKN-SUPPRESS-DISPLAY
is set to ZSPI-VAL-FALSE.
ZVHS-TKN-PNAME
is the process name of VHS.
ZVHS-TKN-ENVIRONMENT-NAME
is the name of the environment of this VHS. If no environment name is defined
using the VHS startup parameter ENVIRONMENT-PARAM, then the default value
is VHS.
ZVHS-TKN-VHS-GUI-MODE
indicates if the VHS process is running in GUI mode or not. ZVHS-VAL-VHS-GUI-
OFF (0) indicates that the VHS-GUI-MODE parameter is set to OFF. ZVHS-VAL-
VHS-GUI-ON (1) indicates that the VHS-GUI-MODE parameter is set to ON.
Event-Message Text
timestamp pid environment-name: Process VHS-process-name
successfully started.