Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-002
D-78
118: ZVHS-EVT-REMOVE-PROMPT
ZEMS-TKN-EVENTNUMBER
is the event message number. The value for this event message is ZVHS-EVT-
REMOVE-PROMPT (118).
ZEMS-TKN-SUBJECT-MARK
is the standard EMS token that immediately precedes the subject token ZVHS-
TKN-APPLICATION-NAME.
ZEMS-TKN-EMPHASIS
is set to ZSPI-VAL-FALSE.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID
and TEXT
are described under EMS Standard Definitions on page D-5.
ZEMS-TKN-SUPPRESS-DISPLAY
is set to ZSPI-VAL-FALSE.
ZEMS-TKN-ACTION-ID
is set to an internal VHS reference number.
ZEMS-TKN-ACTION-NEEDED
is set to FALSE to specify that this is an action-completion event message.
ZVHS-TKN-APPLICATION-NAME
is the name of the application that has prompted VHS.
ZVHS-TKN-ENVIRONMENT-NAME
is the name of the environment of this VHS. If no environment name is defined
using the VHS startup parameter ENVIRONMENT-PARAM, then the default value
is VHS.
ZVHS-TKN-CPU
is the CPU number the application is running in.
ZVHS-TKN-PIN
is the process number of the application.
ZVHS-TKN-CRTPID
is the process ID of the application that has prompted VHS.