Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-002
D-104
130: ZVHS-EVT-INSP-TOO-MUCH-PROMPT
ZEMS-TKN-EMPHASIS
is set to ZSPI-VAL-TRUE because this event message is critical.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID
and TEXT
are described under EMS Standard Definitions on page D-5.
ZEMS-TKN-SUPPRESS-DISPLAY
is set to ZSPI-VAL-FALSE.
ZVHS-TKN-ENVIRONMENT-NAME
is the name of the environment of this VHS. If no environment name is defined
using the VHS startup parameter ENVIRONMENT-PARAM, then the default value
is VHS.
ZVHS-TKN-INSPECT-OBJECT
is the name of the Inspect/eInspect process.
ZVHS-TKN-PNAME
is the process name of VHS.
ZVHS-TKN-VHS-OBJECTFILE
is the object file name of VHS.
ZVHS-TKN-VERSION
is the version of VHS.
Probable Cause
One Inspect/eInspect process can handle up to 10 different applications. If
Inspect/eInspect prompts VHS with more than 10 different applications for one
process, VHS does not accept the application prompts over 10.
Recommended Action
None.