Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Installing VHS
Virtual Hometerm Subsystem (VHS) Manual—429311-002
2-11
Installing the VHS and VHSCI Programs and the
VHS GUI Agent Facility
19 PROMPT-EVENT-
RESEND-DELAY
wait-delay 15 Specifies the time (in
minutes) VHS will wait
before generating a repeat
(ZVHS-EVT-RESEND-
PROMPT) event for an
unanswered prompt. This
parameter will be ignored if
VHS-GUI-MODE is set to
OFF. The possible values
are from 1 to 60. For
complete description of this
parameter, see Section 8,
The VHS GUI
20 PRIMARY-
LOGFILE-
BUFFERED
log-file-buffer OFF Allows the creation of the
Primary Log files using the
write-through caching
option.
21 PRIMARY-
LOGFILE-PURGE
log-file-purge-
flag
ON Allows the Primary Log
files to be kept instead of
using the maximum of 5
files.
22 VHS-LOGGER logger-flag ON Used to turn on or turn off
the VHS logging function.
Valid values are ON and
OFF. ON means VHS will
log all messages into its
Primary Log file.
23 ADD-TEXT-TO-
EVENT
Text-in-event-
flag
ON Specifies if the token text
will be part or not of the
EMS event. Valid values
are ON and OFF.
24 GENERATE-
INSPECT-EVENT
generate-
Inspect/eInspect-
event-flag
ON Used to turn off the EMS
event generation for
Inspect/eInspect
1
messages. Valid values are
ON and OFF.
25 GENERATE-
PROMPT-EVENT
generate-prompt-
event-flag
ON Used to turn off the EMS
event generation for
Prompt messages. Valid
values are ON and OFF.
26 GENERATE-
DISPLAY-EVENT
generate-display-
event-flag
ON Used to turn off the EMS
event generation for
display messages. Valid
values are ON and OFF.
Table 2-3. VHS and VHSCI Installation Parameter Values (page 4 of 5)
No. Name Value Default Description
1
The eInspect debugger is supported only on systems running H-series RVUs.