Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

VHSCI Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-002
G-25
Interprocess Communication Messages
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery procedures.
-00011
Cause. The file specified in the request has an invalid format.
Recovery. Determine the valid file type code for the target file and reissue the
command.
-00012
Cause. A fixed limit or configuration limit was exceeded. This error is usually used to
report any overrun of a limit, including internal control blocks or tables.
Recovery. The recovery action depends on the limit exceeded. For more information,
see the subsystem-specific reference manual.
-00013
Cause. A hardware problem occurred and the signal was lost.
Recovery. Recovery is hardware-specific; check the modem, port, and other
hardware.
-00014
Cause. Unable to obtain memory space.
Recovery. This error usually indicates a resource-availability problem caused by a
large amount of activity (assuming that the configuration is proper for the operating
environment and that the associated hardware is functioning normally). Attempt to
determine and correct the problem, or wait awhile before reissuing the request.
-00015
Cause. An ADD request was attempted against a defined object.
Invalid type of file: file-name for obj-name
Maximum Limit Exceeded: limit-number for obj-name
number Modem Error: number signal loss
Unable To Obtain Memory: text for obj-name
Object name Already Defined