Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

VHSCI Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-002
G-30
Interprocess Communication Messages
-00036
Cause. The particular value specified with the named attribute conflicts with one of the
other attribute values for the object.
Recovery. Specify a different value or delete the attribute, and reissue the command.
-00037
Cause. The command power specified on the command was insufficient to change the
state of the object.
Recovery. Reissue the command with a higher command power level.
-00038
Cause. The command power specified on the command was insufficient to change the
state of the object.
Recovery. Reissue the command with a higher command power level.
-00039
Cause. The object mentioned does not support the command.
Recovery. See the subsystem documentation for a more complete description of
when this object can and cannot support this command.
-00040
Cause. This command has already been issued against this object and the object is
processing the command.
Recovery. None.
Value of attribute attribute-name may not be used in
conjunction with attribute-name for object-name
Command power level too weak for the state of object
object-name
Command power level too weak for the condition of object
object-name
Command not supported by object-name
Command in progress for object-name