Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Installing VHS
Virtual Hometerm Subsystem (VHS) Manual—429311-002
2-34
VHSGCONF File
VHSGCONF File
VHSGCONF is the VHS GUI Agent configuration file. You need to modify the default
file to:
•
Use the VHS GUI facility
•
Restrict VHS GUI user capabilities
The VHSGCONF file must reside in the $SYSTEM.SYSTEM subvolume. For more
information, see Appendix 8, The VHS GUI.
VHS Run-Time Options
The following subsections present some file-specific considerations that you should be
aware of before using VHS.
VHS ASSIGNs
You can customize the VHS server to your specific requirements with a set of run-time
options. These run-time options can be modified by editing the VHS startup file created
during the installation process.
Table 2-7 lists each ASSIGN used by VHS.
Note. The eInspect debugger is supported only on systems running H-series RVUs.
Table 2-7. VHS ASSIGNs
ASSIGN
Name Default Value if Omitted Description
PRIMARY-
LOGFILE
$SYSTEM. VHSLOG.LOG Specifies the name of the primary log
file for VHS. The form of this
parameter is
$volume.subvolume.aaa where
aaa must be alphabetical: for
example, $SYSTEM.VHSLOG.LOG.
The primary and secondary extents
of the primary-logfile are also
specified using this ASSIGN.
INSPECT-
FILE
$current-
volume.subvolume.VHSINSP
Specifies the name of the VHS
Inspect file used for automatic
processing of Inspect/eInspect
prompts.
INSPECT-
SAVEFILE
$SYSTEM.VHSDUMP.SAVE0000 Specifies the name of the Inspect
SAVEABEND files for VHS. The form
of this parameter is
$SYSTEM.VHSDUMP.SAVE0000.