Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Using VHS
Virtual Hometerm Subsystem (VHS) Manual—429311-002
3-7
How VHS Manages Messages
After you have reconfigured your Pathway system, you can restart it and your Pathway
application.
How VHS Manages Messages
The VHS process receives messages of many types from many sources. VHS
manages these types of messages:
•
OPEN messages
•
Display messages
•
Inspect/eInspect prompts
•
Debug prompts
•
Application prompts
•
Reply messages (to application prompts)
RESET TCP
SET TCP AUTORESTART 2
SET TCP MAXREPLY 2000
SET TCP MAXTERMDATA 32000
SET TCP SERVERPOOL 20000
SET TCP TERMPOOL 8000
SET TCP MAXTERMS 25
SET TCP MAXPATHWAYS 5
SET TCP PROGRAM $SYSTEM.SYSTEM.PATHTCP2
SET TCP TCLPROG POBJ
ADD TCP TCP-6530, CPUS 0:1
RESET PROGRAM
ADD PROGRAM EMPREQ, TYPE T16-6530 (INITIAL EMPREQ), TCP TCP-6530
RESET SERVER
SET SERVER PROGRAM EMPSRV
SET SERVER CPUS (0:1)
SET SERVER HOMETERM $VHS
SET SERVER MAXSERVERS 5, NUMSTATIC 0
SET SERVER LINKDEPTH 1, MAXLINKS 5
SET SERVER TMF ON, AUTORESTART 2
SET SERVER ASSIGN ERROR-LOG-FILE, ERRORLOG
SET SERVER ASSIGN EMPLOYEE-FILE, EMPLOYEE
ADD SERVER EMPLOYEE-SERVER
RESET SERVER
SET SERVER PROGRAM TSTSRV
SET SERVER CPUS (0:1)
SET SERVER MAXSERVERS 5, NUMSTATIC 0
SET SERVER LINKDEPTH 1, MAXLINKS 5
SET SERVER TMF ON, AUTORESTART 2
SET SERVER ASSIGN ERROR-LOG-FILE, ERRORLOG
SET SERVER ASSIGN EMPLOYEE-FILE, TESTCONV
ADD SERVER TESTCONV-SERVER
Note. The eInspect debugger is supported only on systems running H-series RVUs.