Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Using the VHS Browser
Virtual Hometerm Subsystem (VHS) Manual—429311-002
4-3
High PIN Support
You can access the VHS Browser from the TACL prompt:
•
To access the VHS Log Browser screen, enter:
1> run vhsl
or
1> vhsl
•
To access the VHS Prompt Browser screen, enter:
1> run vhsp
or
1> vhsp
High PIN Support
To run the VHS Browser with High PIN support:
1. Ensure that the #HIGHPIN built-in variable is set to ON at the TACL prompt.
2. Set the HIGHPIN attribute to ON in the file ZVHSDEFS in the browser subvolume.
3. Restart Pathway.
Exiting the VHS Browser
How you exit the VHS Browser depends on whether the VHS Browser is installed on
your system in ViewPoint or as a stand-alone Pathway system.
VHS Installed in ViewPoint
To exit the VHS Browser, use the Log Browser screen, the Prompt Browser screen, or
the Environment Detailed screen. You must have installed the ViewPoint Extras screen
included with VHS. For more information about installation details, see Section 2,
Installing VHS.
How you exit the VHS Browser depends on the type of ViewPoint Extras screen.
Exiting VHS Browser and Returning to the ViewPoint
Extras Screen
To exit the VHS Browser and return to the ViewPoint Extras screen:
•
Press the F16 function key until you return to the Log Browser screen, the Prompt
Browser screen, or the Environment Detailed screen.
•
Press the SF16 function key to return to the ViewPoint Extras screen.