Virtual Hometerm Subsystem (VHS) Manual (G06.24+, H06.04+, J06.03+)

Using the VHS Browser
Virtual Hometerm Subsystem (VHS) Manual—429311-002
4-5
VHS Installed as a Stand-Alone Pathway System
VHS Installed as a Stand-Alone Pathway System
To return to the TACL prompt from the VHS Browser:
•
Press the F16 function key until you return to the Log Browser screen, the Prompt
Browser screen, or the Environment Detailed screen.
•
Press the SF16 function key to display the TACL prompt.
VHS Screen Navigation
From the VHS Log Browser screen or the VHS Prompt Browser screen, you can
navigate to the other VHS Browser screens. Figure 4-1 shows the simplified guidelines
for moving from one screen to another. You can access the Help screen from any of
the other four screens by pressing F15.
VHS Screen Format
The VHS screens follow the screen format used in many other Pathway block-mode
applications. In block mode, information is transmitted as complete messages or
blocks of data. Block-mode operation is identified by the word BLOCK in the last
screen information field located on line 25.
Figure 4-2 on page 4-6 shows an example of the general format of the screens;
Table 4-1 on page 4-6 explains each major section of the screen.
Figure 4-1. Screen Navigation Map
Log Browser
Prompt Browser
Prompt
Detail
VHS Profile
SF6
F14
Console Facility
SF7
F11
F14
Return to
last screen ( F16)
Exit VHS ( SF16)
F3
F4
Env Detail
F10
F10
F4
F3
F10
F14
VST041.vsd