Virtual TapeServer 6.02.00 Installation Guide
HP Virtual TapeServer Installation Guide 25 HP Part Number 528654-006 Sept 2006
3.
Select Logical Tapes > Edit an existing logical tape.
4.
Enter a name of your choice and select the appropriate tape under physical tapes.
5.
Click Edit Logical Tape.
6.
Return to Manage Tape Connections.
7.
Select Add a Tape Connection.
8.
Reconnect the host and logical tape that you deleted in Step 2.
9.
Repeat this procedure as needed.
Editing Host Definitions
Virtual TapeServer is preconfigured with generic host connections that represent the number of
connections purchased. You can select a variety of icons to graphically represent the hosts in
your network. To define hosts and icons:
1.
Select Manage Connections > Manage Tape Connections.
2.
Select Edit an existing host definition.