Virtual TapeServer 6.02.00 Installation Guide

HP Virtual TapeServer Installation Guide 32 HP Part Number 528654-006 Sept 2006
Setting up the Supervisor/Operations groups.
A. Under “Users and Groups” select tapelabs or operator.
B. Set Password:
1: Select the operator ID from the Users drop-down box
2: A second row is displayed with the User and username selected.
3: Select SET PASSWORD to enable the password field.
4: Enter the new or changed password in this field
5: Select APPLY for the changes to take effect or CANCEL to cancel this action.
The following message displays after successfully changing the password.
C. Expand the Rights option
D. Select the Operator column and select the features that you want to enable the
Operator group to be able to access.
1. Basic Access (CLOSED)
1.1 Factory Setup Activities
1.2 Supervisory Functions
1.2.1 Access Administration
1.2.1.1 System Access Controls
1.2.1.2 User Access Controls
1.2.2 Block and Unblock TapeServer
1.2.3 Database Download
1.2.3.1 Database Upload
1.2.4 Edit VTS Configuration File
1.2.5 Halt and Reboot TapeServer
1.2.6 Manage Scheduled Jobs
1.2.7 System Maintenance Functions
1.2.8 Turn Compression On or Off
1.2.9 VTS/Linux Configuration
Backup
1.2.9.1 VTS/Linux Configuration
Restore
1.2.10 View log files
1.2.11 View/Manage Configuration
1.3 Virtual Tape Operations
1.3.1 Scan and Cleanup Control
Panel
1.3.2 Virtual Tape Cartridge
Maintenance
1.3.2.1 Delete Cartridges
1.3.3 Virtual Tape Import and Export
1.3.4 Virtual Tape Instant DR
1.3.5 Virtual Tape Mounts and Locks
1.3.6 Virtual Tape Pool Maintenance
1.3.7 Erase Cartridges
1.3.8 HSM Migration
1.3.9 Mount Cartridges
1.3.10 Unmount Cartridges
1.4 View System Status
1.4.1 Change Refresh Rate
1.4.2 Stop and Start TapeServer
1.5 Vault Access
1.5.1 Access to All Vaults
E. To allow the Operator or Supervisor groups to change their own passwords, select
1.2.1.2 User Access Controls.