Virtual TapeServer 6.02.00 Installation Guide

HP Virtual TapeServer Installation Guide 40 HP Part Number 528654-006 Sept 2006
is a secure or trusted environment. The encryption process used in a secure transfer
might cause some degradation in the data transfer rate.
All Files Checkbox. This option uses wild cards in the source cartridge name. If All Files
is not checked, only the most recently modified file in the set of cartridges identified with
the wild card is backed up. Checking All Files bypasses this selection process and
causes all of the wildcard identified files to be backed up. When you select All Files and
use wild cards, it makes more sense to specify "==" in the cartridge name field.
The backup target and other specifications apply to each jobset and are saved as part of
each jobset.
Note: If your browser supports the necessary functionality, pressing the enter key at any
time validates your entries thus far and makes any necessary substitutions per use of
the single equal-sign character. It does not cause an error message to appear if required
fields are currently empty. That would happen during a SAVE attempt.
Instant/DR Configuration Example
To set up Instant/DR, the Virtual TapeServer server module must have a monitor,
keyboard, and mouse attached for all steps. The installer should have a firm grasp of
networking principles to be successful.
This example provides a step-by-step process for enabling Instant/DR (very similar to
AutoCopy) between two sites, New York and Los Angeles, connected by a wide area
network (WAN):
Network Settings
At the Virtual TapeServer server module monitor, open a shell.