Virtual TapeServer 6.02.00 Installation Guide

HP Virtual TapeServer Installation Guide 62 HP Part Number 528654-006 Sept 2006
D. From the Edit Virtual Tape screen, you will need to change the TARGET from 5 to 0
from the dropdown box. When finished Click the button Edit Virtual Tape.
BEFORE AFTER
E. Click Add A Tape Connection to add back the tape connection you just edited..
Select the Virtual Tape you just edited and the Logical Tape that it was connected to
previously.
F. The connection has been successfully edited and ready to use on the Fibre Channel
bus.
G. Repeat Step 5A to F for each virtual tape connection that needs to be updated.