Virtual TapeServer 6.02.00 Installation Guide

HP Virtual TapeServer Installation Guide 63 HP Part Number 528654-006 Sept 2006
Use Step 5H through 5Q to reallocate an existing SCSI virtual tape connection to a Fibre
Channel card in a different slot. Do not follows steps 5H to 5N if you have already performed
Steps 5A to 5G.
H. Select Factory Setup > Factory Options > Manage System Limits. Check the virt
box number corresponding to the bus to change to target mode. Click Set Limits to
save these settings.
I. Select Manage Connections > Delete a Tape Connection.
J. Select the virtual tape connection you want to modify. Click Delete Tape
Connection and return to Manage Tape Connections.
K. Select Edit An Existing Virtual Tape. Select the Virtual Tape you wish to edit and
Click Edit.