Virtual TapeServer 6.02.00 Installation Guide

HP Virtual TapeServer Installation Guide 64 HP Part Number 528654-006 Sept 2006
L. From the Edit Virtual Tape screen, change the Bus number from whatever it was for
the SCSI virtual tape connection to whatever Fibre Channel bus you want it to be
using the drop down box.
M. Change the Target from 5 to 0 using the drop down box.
N. When finished Click the button Edit Virtual Tape.
BEFORE AFTER
O. Click Add A Tape Connection to add back the tape connection you just edited..
Select the virtual tape connection you just edited and the Logical Tape that it was
connected to previously.