Virtual TapeServer 6.03.41 Installation Guide

Safety and Regulatory Guidelines | 131
Compliance with these directives implies conformity to the following European Norms (the
equivalent international standards are in parenthesis):
• EN55022 (CISPR 22) - Electromagnetic Interference
• EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) - Electromagnetic Immunity
• EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics
• EN61000-3-3 (IEC61000-3-3) - Power Line Flicker
• EN60950-1 (IEC60950-1) - Product Safety
Laser compliance
This product may be provided with an optical storage device (that is, CD or DVD drive) and/or
fiber optic transceiver. Each of these devices contains a laser that is classified as a Class 1
Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does
not emit hazardous laser radiation.
WARNING: Use the controls or adjustments or performance of procedures other
than those specified herein or in the laser product's installation guide may result in
hazardous radiation exposure. To reduce the risk of exposure to hazardous
radiation:
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
Safety caution
The following icon or caution statements may be placed on equipment to indicate the presence
of potentially hazardous conditions:
DUAL POWER CORDS CAUTION:
"THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT
ALL POWER SUPPLY CORDS TO COMPLETELY REMOVE POWER FROM THIS
UNIT."
"ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON
D'ALIMENTATION. DÉBRANCHER TOUS LES CORDONS D'ALIMENTATION
AFIN DE COUPER COMPLÈTEMENT L'ALIMENTATION DE CET
ÉQUIPEMENT".
DIESES GERÄT HAT MEHR ALS EIN NETZKABEL. VOR DER WARTUNG
BITTE ALLE NETZKABEL AUS DER STECKDOSE ZIEHEN.
Any surface or area of the equipment marked with these symbols indicates the
presence of electric shock hazards. The enclosed area contains no operator-
serviceable parts.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure.

• Do not try to open the module enclosure. There are no user-serviceable
components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
• Allow only HP Authorized Service technicians to repair the module.

Ꮨ